|
Properties
Lithofin OIL-EX dissolves and absorbs oil and oil
based dirt. Its paste like consistency enables the
active ingredients to work on the substrate for a long
time, so that even deeply ingrained dirt can be
successfully removed.
Directions for Use:
Remove solids and surface soiling mechanically using
a scraper or a brush. Apply Lithofin OIL-EX to the dry
surface using a spatula, so that a coating thickness of
at least 2mm is achieved.
Allow to dry for
approximately 12 hours. The remaing powder can be
brushed off after complete drying.
Please Note: some dark natural stone can show small
amounts of the powder in the porous surface. If this
happens please clean with Lithofin MN-Power-Clean.
Deeply ingrained dirt can be removed by 2 or 3
applications of the product.
The active working time
of the product can be prolonged by covering the area
with plastic film. Do not apply under -10°C or over
25°C. Do not use on surfaces which are sensitive to
solvents, lacquered, coated or synthetic surfaces. It is
recommended to try the product on a small area in an
inconspicuous place.
| 
