|
Lithofin MN Builders Clean 1Ltr is a special product from the Lithofin range for marble, natural and artificial stone. This highly active cleaner contains a balanced combination of different acids and rust proventative constituents. Lithofin MN Builder's Clean dissolves and removes cement films and mortar residues, efflorescence, lime deposits, soiling, together with rust and rust stains.
Please note, Lithofin MN Builders Clean is not suitable for polished and ground surfaces of limestone, marble, concretep-based stones, terazzo and similar acid-sensitive surfaces. If in doubt always test in inconspicuous area.
Application: Dependent on nature and degree of the soiling, use Lithofin MN Builder's Clean either pure or diluted 1:10. Apply uniformly with a scrubbing brush. After a few minutes, brush once more and then rinse thoroughly with water.
Coverage: about 10-15m2/ litre
| 
